It’s the middle of summer in the Philippines and you’re out by the pool or the beach, enjoying a refreshing drink while listening to your favorite tunes on your portable Bluetooth speaker. Then all of a sudden your speaker battery runs out, what do you do then? Should you wait for the Bluetooth speakers to charge back up before using it? Or can you use it right away? These are questions that we will be answering in this article.There are plenty of amazing Bluetooth speakers out there in the Philippines, and if you’re looking for one we have compiled a list of top portable Bluetooth speakers you can find in the Philippines!
Can you use your Bluetooth speakers while charging
The short answer is yes, and no. It all depends on the type of Bluetooth speaker that you have. If you have a Bluetooth speaker with a built-in battery, then it is perfectly safe to use your speaker while charging. However, if your Bluetooth speaker has a removable battery, then it is not recommended to use the speaker while charging.
The reason why you can’t use a Bluetooth speaker with a removable battery is that there is a risk of the battery overheating and causing a fire. So it’s best to wait until the battery is fully charged before using your speaker again.
What happens when you use a Bluetooth speaker while charging
If you use your Bluetooth speaker while charging, the speaker will continue to play until the battery is fully charged. Once the battery is fully charged, the speaker will automatically shut off. Just a caveat for Bluetooth speakers that have a removable battery, as mentioned earlier, it is not recommended to use your speaker while charging to avoid any overheating incidents.
If your battery starts to overheat, you will start to smell a burning smell, and the speaker will start to emit smoke. If this happens, it is best to unplug the Bluetooth speaker immediately and move it away from any flammable materials.
What are the benefits of switching the speaker off when charging
One of the benefits of switching your Bluetooth speaker off when charging is that you can prolong the life of your speaker’s battery. When you leave your Bluetooth speaker on while charging, the battery will continue to discharge even while it’s plugged in. This can shorten the overall lifespan of your speaker’s battery.
Another benefit of switching your Bluetooth speaker off when it’s not in use is that it can save you money on your electricity bill. If you leave your Bluetooth speaker on and plugged in all the time, it will consume a small amount of power, which can add up over time.
Should you leave the speaker charging overnight
If you are using a Bluetooth speaker with a built-in battery, then it is perfectly safe to leave your speaker charging overnight. However, if your Bluetooth speaker has a removable battery, it is not recommended to leave it charging overnight.
As mentioned earlier, there is a risk of the battery overheating and causing a fire if you leave your Bluetooth speaker charging for too long. So it’s best to wait until the battery is fully charged before using your speaker again.
What happens when you leave the battery plugged in for a long time
If you leave the battery of your Bluetooth speaker plugged in for a long time, the battery will eventually lose its charge and will need to be replaced. However, if you unplug the Bluetooth speaker and then plug it back in, the battery will recharge and be good as new.
In conclusion, can you use your Bluetooth speaker while charging? It all depends on the type of Bluetooth speaker that you have. If you have a Bluetooth speaker with a built-in battery, then it is perfectly safe to use your speaker while charging. However, if your Bluetooth speaker has a removable battery, then it is not recommended to use the speaker while charging.
We hope you found this article helpful. If you have any further questions, leave a comment down below and we will try to accommodate you the best we can! Also, if you’d like to learn if wireless earphones or Bluetooth headphones are safe, then we have that covered as well!
FAQs
Is it OK to use JBL speaker while charging? ›
Yes. Our JBL Charge 4 can be used while it's charging since it has lithium-ion batteries. These have smart circuits that will go into trickle charging when the battery is full, so it will not be overcharged.
Can you charge a speaker while using it? ›If you want to use the speaker while charging, lower the volume of the speaker. Otherwise, turn off the speaker and charge the battery to its full capacity. When you use the speaker at a loud volume for a long time, the battery may run low even if the speaker is connected to an AC outlet.
Should Bluetooth speaker be on or off when charging? ›First of all, please ensure that your wireless Bluetooth speaker is switched off before charging or connecting it to its power source via USB cable or AC adaptor.
Can I use my JBL go 2 while charging? ›A: Yes. JBL Go 2 can be used while charging. This will not affect the battery since it is lithium-ion and it has a PCM circuit. The speaker will automatically switch to trickle charging when the battery is full.
Is it okay to use JBL charge 5 speaker while charging? ›Additionally, the USB-A port in the back is a service port, so you can charge your phone from it, but you won't be able to play music off your phone to the speaker through the port. Does the JBL Charge 5 work while charging? Yes, you are able to use the speaker while it's charging.
Can you play the JBL PartyBox on the go while charging? ›Our JBL PartyBox Series can be used while plugged in. There's no harm in using the unit while it is connected to a power source. Our products have PCM circuits that manage the charging of the battery. However, if you'd like to save energy, unplug the speaker.
How long do Bluetooth speakers take to charge? ›It takes approximately three (3) hours for the built-in battery of the Bluetooth® speaker to charge from an empty state.
How can I extend the battery life of my Bluetooth speaker? ›Our top tips on how to optimise battery life
Make sure that the speaker and its battery are neither too warm nor too cold (between 0-25°C). Handle the battery carefully and avoid dropping it! Avoid water contact or use water-resistant Bluetooth devices.
There is no harm in leaving your JBL GO 3 connected to electricity at all times. The battery will not overcharge. You can pick it up, unplug it from the charger and be on your way, knowing that you have a full charge. However, if you'd like to conserve electrical energy, disconnect from charging.
How long does a Bluetooth speaker battery last? ›Of course, for a Bluetooth speaker to be portable it must have a built-in battery. Battery life for a portable speaker tends to be around 6-12 hours, but some last up to 24 hours.
Is it best to leave Bluetooth on all the time? ›
Bluetooth technology offers convenience - from hands-free phone calls to wireless file-sharing to playing music on a vehicle's speakers. But leaving your Bluetooth on all the time can be dangerous, and hackers are exploiting the technology to access private information, spread malicious software and more.
Does using Bluetooth speaker drain battery? ›Where Bluetooth does have a noticeable impact on battery life is when you're actively using the Bluetooth connection, such as when you're streaming audio to a Bluetooth speaker or headphones. The lesson here is simple: If your battery is running low, you shouldn't stream audio over Bluetooth.
Can you overcharge a JBL Bluetooth speaker? ›There is no harm in leaving your JBL Charge 4 plugged in on a power source. Our JBL Charge 4 doesn't overcharge because once the speaker is fully charged, it will stop charging and discard any electrical current received.
Can you use Sony Bluetooth speaker while charging? ›If you want to use the speaker while charging, lower the volume of the speaker. Otherwise, turn off the speaker and charge the built-in battery sufficiently. When you use the speaker at a loud volume for a long time, the built-in battery may run low even if the speaker is connected to an AC outlet.
How do you know if the Bluetooth speaker is fully charged? ›The CHARGE indicator will not light up if the battery is fully charged. Depending on the model, the CHARGE indicator may not light up while charging the speaker with the power turned on. If the battery is being charged while the speaker is turned off, the CHARGE indicator will light up.
Can you overcharge a speaker battery? ›No, the device will interrupt the charging circuit once the charger and battery reach equilibrium. However, if you leave the speaker plugged in to charge continuously, the battery will transfer from float (not charging) to charge as soon as the battery level drops just below the float voltage.
Can I use JBL extreme while charging it? ›Then, plug the charger into a working wall outlet. Don't worry though about having to wait for the speaker to fully recharge before you can play it again. The JBL Xtreme 2 will indeed play while charging, although it might take slightly longer to charge when played at high volumes.
Is it OK to use JBL charge 3 while charging? ›There is no harm in leaving your JBL GO 3 connected to electricity at all times. The battery will not overcharge. You can pick it up, unplug it from the charger and be on your way, knowing that you have a full charge. However, if you'd like to conserve electrical energy, disconnect from charging.
Can you use JBL Flip 6 while charging? ›We also love that the JBL Flip 6 can play while it's charging, a neat feature to have when you run out of battery. You have a neat little charging indicator on the back of the speaker, next to the power and Bluetooth buttons.
Can I use JBL Flip 3 while charging? ›A: Yes, you can play it while charging and it works with a car charger.
Can you use JBL Boombox while charging? ›
A: There's no harm in keeping it plugged in while playing. Our JBL Boombox uses a smart battery which switches to the outlet power when the battery is full.
How long does it take to charge a Bluetooth speaker? ›It takes approximately three (3) hours for the built-in battery of the Bluetooth® speaker to charge from an empty state.